| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | One Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipped with tailstock
| project | content | unit | CK46DTY | CK52DTY |
| machine range | Swing over bed | mm | Ø 600 | |
| Maximum turning length | mm | 400mm | ||
| Maximum diameter of through-bar material | mm | Ø 45 | Ø 55 | |
| main shaft | Spindle head type | A2-5 | A2-6 | |
| spindle bore | mm | Ø 56 | Ø 66 | |
| Maximum spindle speed | r/min | 6000 (set at 4500) | 4200 (set to 3500) | |
| feed | Maximum travel of X-axis | mm | X-axis radius 175+80 (i.e., the 90° power head passes through the spindle center by 80) | |
| Maximum travel of Z/Y axis | mm | Z-axis 400, Y-axis 120 (±60) | ||
| Maximum rapid movement along X/Z/Y axes | m/min | 24 (set to 18) / 24 (set to 18) / 15 (set to 12) | ||
| X/Z/Y-axis C3 grade screw rod | mm | 32/32/32 | ||
| X/Z/Y-axis roller P-grade linear rail, extended slider | mm | 35/35/35. Extend the slider, increase the load, and enhance the rigidity | ||
| Sixteen-station direct-drive power turret | Power turret model (power tool holder) | BMT | BMT45-ER25, BMT55-ER32, or BMT65-ER40 | |
| Power head collet | ER | Ø25/32/45 | ||
| Fixed knife holder size | mm | 25X25 | ||
| Boring tool holder shank diameter | mm | Ø32/40 | ||
| electrical machinery | Main motor power/torque | KW/Nm | 7.5 KW / rated 47 Nm Optional Syntec 11KW / rated 72Nm |
11KW/rated 72Nm Syntec 15KW / rated 98Nm |
| Maximum spindle speed | r/min | 6000 (set at 4500) | ||
| X/Z/Y-axis motor power/torque | KW/Nm | Y-axis Syntec 2.4KW/rated 11.5Nm, X/Z-axis Yaskawa 1.8KW/11.5Nm | ||
| Maximum speed of the power motor of the power turret | r/min | 8000 rpm (0° power head ≤ 8000 rpm, 90° power head ≤ 6500 rpm) | ||
| Power/torque of the power head motor | KW/Nm | 8.5 KW/rated 16.5 Nm, capable of overloading to 50 Nm within 4000 rpm | ||
| Power/torque of the tool change motor for the power turret | KW/Nm | Syntec 1.0 KW /3NM | ||
| other | Main shaft positioning brake device | hydraulic pressure | ||
| Bed inclination | linear measure | 35° | ||
| Machine tool length X width X height H | mm | 2200X1500X1900 | ||
| Total weight of the whole machine | KG | 3900KG, including the tailstock of 4200KG | ||
| total power | kw | 15 | ||
| Average power consumption | kw/h | 3 | ||
| tailstock | Programmable high-rigidity tailstock, specific installation and configuration available upon request | |||
| Main inspection items | test method | Factory standards |
| Radial runout of the main shaft | Detect the runout of the outer conical surface | 0.0025 |
| X-axis repeat positioning | Test the repeatability accuracy of the X-axis positioning Note: First, pre-run for about 50 times to offset the error caused by the cold and hot machine, and then test the repeatability of positioning. |
±0.003 |
| Z-axis repeat positioning | Test the repeatability accuracy of fixed-point positioning on the Z-axis Note: First, pre-run for about 50 times to offset the error caused by the cold and hot machine, and then test the repeatability of positioning. |
±0.003 |
| Y-axis repeat positioning | Test the repeatability accuracy of fixed-point positioning on the Y-axis Note: First, pre-run for about 50 times to offset the error caused by the cold and hot machine, and then test the repeated positioning. |
±0.004 |
| C-axis repeated positioning | 0.006° | |
| XZ axis perpendicularity | 0.006° | |
| Verticality of XY axis | 0.012° | |
| ZY axis verticality | 0.012° | |
| If the customer intends to test the ISO or VDI accuracy of the X/Z/Y axes, it must be specified in the contract that the customer must inspect this item during the initial acceptance at the factory. | ||
1.The innermost layer is EPE pearl cotton film package.
2.The middle layer is wrapping up with environmental protection material .
3.And the outermost layer is winding up with PE stretch film.
4.They're very environmentally friendly.
5.If you need a wooden box, we will make a wooden box.
Delivery Detail: Shipped in 25-30 working days after payment.
Xuetai Technology (Tianjin) Co., Ltd. Was established in 2024 and is headquartered in the Tianjin Binhai New Area Free Trade Pilot Zone (Airport Area). Since the founding of the company, Its business team have focused on the sales and after-sales service of imported CNC machine tools in Chinese Mainland for 20 years. With the continuous improvement of the quality of Chinese manufacturing and global competitiveness, the company has decided to increase its foreign trade business on the basis of domestic trade, and is committed to promoting and applying Chinese electromechanical products in the international market, covering more than 100 countries and regions around the world. Our main business is the import and export of CNC machine tools and their supporting automation and auxiliary equipment, and we have established long-term cooperation with many internationally renowned brands and Chinese suppliers. With a professional trade team, we accurately grasp market trends, efficiently handle customs clearance, logistics and other links, and provide customers with one-stop trade solutions.
| Question: What are the main products of your company? |
| Answer: We specialize in manufacturing various machine tools, such as CNC lathes, CNC milling machines, CNC lathes (there's a repetition here, might be an error in the original text), vertical machining centers, horizontal machining centers, ordinary lathes, turning - milling composite machining machines, etc. |
| Question: Where do you export to? |
| Answer: All over the world. |
| Question: Can you produce non - standard products? |
| Answer: Yes, we can. Please provide samples or drawings. |
| Question: How do you transport the products? |
| Answer: We can provide transportation options such as Delivered Duty Paid (DDP), Cost, Insurance and Freight (CIF), Free On Board (FOB), and Free Carrier (FCA) |
| Question: What are the payment terms? |
| Answer: Payment is made by T/T. A 30% deposit is required upon placing an order, and the remaining 70% should be paid before shipment. |
| Question: What is the minimum order quantity? |
| Answer: One unit. (Only for some low - cost machine tools will the minimum order quantity exceed one unit.) |
){kind=link}